Programming and Operating Fanuc and Epson Robots Training Course

Drones and photogrammetry are now essential tools in high-precision infrastructure supervision. With the integration of advanced geodesy principles, real-time modeling, and high-accuracy drone mapping, professionals can achieve deeper insight, accuracy, and productivity in construction environments.

This instructor-led, live training (online or onsite) is aimed at intermediate-level to advanced-level professionals who wish to apply advanced drone and photogrammetry workflows, including geodetic controls and high-precision mapping techniques, to complex infrastructure projects.

By the end of this training, participants will be able to:

• Apply advanced photogrammetric methods including RTK/PPK workflows and ground control calibration.
• Integrate geodetic reference systems and projections for large-scale infrastructure sites.
• Design precision flight missions tailored to complex terrain and infrastructure geometry.
• Analyze photogrammetry data with GIS software for structural health, deformation, and compliance tracking.

Format of the Course

• Interactive lecture and discussion.
• Advanced exercises and real-world case studies.
• Hands-on implementation with drone data and modeling tools.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

This instructor-led, live training in Spain (online or onsite) is aimed at engineers and developers who wish to design, develop, and test aerial vehicles through exploring various aerial robotics concepts and tools.

By the end of this training, participants will be able to:

• Understand the basics of aerial robotics.
• Model and design UAVs and quadrotors.
• Learn about the basics of flight control and motion planning.
• Learn how to use different simulation tools for aerial robotics.

ArduPilot is an open source autopilot software suite for drones, rovers, and other unmanned vehicles. It provides advanced features such as autonomous navigation, real-time communication with ground stations, and integration with robotics middleware like ROS2.

This instructor-led, live training (online or onsite) is aimed at intermediate-level developers and technical professionals who wish to design, program, and test unmanned aerial vehicles (UAVs) using ArduPilot.

By the end of this training, participants will be able to:

• Set up a complete development environment for ArduPilot.
• Configure firmware, middleware, and MAVLink APIs for UAV control.
• Use SITL simulation to test and debug drone behavior safely.
• Extend ArduPilot with ROS2 and integrate with external tools or sensors.
• Develop autonomous flight logic and run end-to-end UAV missions.

Format of the Course

• Interactive lecture and discussion.
• Lots of exercises and practice.
• Hands-on implementation in a live-lab environment.

Course Customization Options

• This training is based on the open source autopilot software ArduPilot. To request a customized training for this course, please contact us to arrange.

This instructor-led, live training in Spain (online or onsite) is aimed at anyone who wishes to understand the basics of UAS and apply drone technology in planning, operations, management, and analysis for various industries.

By the end of this training, participants will be able to:

• Gain fundamental knowledge of UAVs and drones.
• Learn about drone classifications and uses to find suitable UAVs that address different needs.
• Evaluate delivery options and regulations for the convenient operation of drones.
• Understand the risks and ethics of using drone technology.
• Explore future uses and capabilities of UAVs including integration with other technologies.

This instructor-led, live training in Spain (online or onsite) is aimed at beginner-level to intermediate-level participants who wish to learn how to use drones and photogrammetry techniques for infrastructure supervision in construction projects.

By the end of this training, participants will be able to:

• Understand the fundamentals of drones and photogrammetry.
• Develop and execute drone flight plans for construction sites.
• Perform photogrammetry tracking and create detailed maps and 3D models.
• Use photogrammetry data for infrastructure supervision and issue detection.
• Apply drone technology to improve construction site safety and efficiency.

This instructor-led, live training in Spain (online or onsite) is aimed at agriculture technicians, researchers, and engineers who wish to apply aerial robotics in optimizing data collection and analysis for agriculture.

By the end of this training, participants will be able to:

• Understand drone technology and regulations related to it.
• Deploy drones to acquire, process, and analyze crop data to improve farming and agricultural methods.

The Evo Max 4T is a professional-grade drone designed for advanced aerial operations, inspections, and data collection.

This instructor-led, live training (online or onsite) is aimed at beginner-level to intermediate-level operators who wish to safely and effectively use the Evo Max 4T for professional applications and prepare for official certification.

By the end of this training, participants will be able to:

• Understand the technical specifications and operation of the Evo Max 4T drone.
• Apply operational safety procedures in aerial activities.
• Comply with current AAC and local drone regulations.
• Implement best practices for efficient and safe drone operations.
• Prepare for certification/licensing through theoretical and practical training.

Format of the Course

• Interactive lecture and discussion.
• Hands-on practice with drone equipment and simulators.
• Practical exercises and real flight scenarios.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

This instructor-led, live training in Spain (online or onsite) is aimed at intermediate-level automation engineers and control system designers who wish to implement motion control solutions using Omron PLCs.

By the end of this training, participants will be able to:

• Understand fundamental motion control concepts and their applications.
• Configure motion hardware and software in Sysmac Studio.
• Program and optimize single-axis and multi-axis motion control.
• Implement coordinated motion strategies, including interpolation and synchronization.

This instructor-led, live training in Spain (online or onsite) is aimed at intermediate-level programmers who wish to enhance their skills in Omron PLC programming, HMI configuration, motion control, and safety systems.

By the end of this training, participants will be able to:

• Configure and program Omron PLCs using Sysmac Studio.
• Understand and apply IEC concepts in ladder logic and structured text programming.
• Develop motion control programs for single-axis and coordinated movements.
• Create HMI interfaces using the NA series and integrate them with Sysmac controllers.
• Implement and simulate safety standards and programs using NX series safety hardware.

This course introduces the student to the basics of Programmable Logic Controllers (PLC). After the discussion of the fundamental concept of PLCs the basic Ladder Diagram instructions are learned and practiced in Industrial Automation tasks. Audience - Electrical Specialists - Mechanical Engineers - Programmers with interest in Industrial Automation

This instructor-led, live training in Spain (online or onsite) is aimed at beginner-level automation engineers and enthusiasts who wish to learn the fundamentals of PLC ladder programming and apply it in industrial and personal projects.

By the end of this training, participants will be able to:

• Understand the basic concepts and applications of PLCs in automation systems.
• Write simple and advanced ladder programs using logical functions and memory management.
• Integrate PLCs with networks for broader system applications.
• Apply learned skills to create and test real-world automation scenarios.

Practical Rapid Prototyping for Robotics with ROS 2 & Docker is a hands-on course designed to help developers build, test, and deploy robotic applications efficiently. Participants will learn how to containerize robotics environments, integrate ROS 2 packages, and prototype modular robotic systems using Docker for reproducibility and scalability. The course emphasizes agility, version control, and collaboration practices suitable for early-stage development and innovation teams.

This instructor-led, live training (online or onsite) is aimed at beginner-level to intermediate-level participants who wish to accelerate robotics development workflows using ROS 2 and Docker.

By the end of this training, participants will be able to:

• Set up a ROS 2 development environment within Docker containers.
• Develop and test robotic prototypes in modular, reproducible setups.
• Use simulation tools to validate system behavior before hardware deployment.
• Collaborate effectively using containerized robotics projects.
• Apply continuous integration and deployment concepts in robotics pipelines.

Format of the Course

• Interactive lectures and demonstrations.
• Hands-on exercises with ROS 2 and Docker environments.
• Mini-projects focused on real-world robotic applications.

Course Customization Options

• To request a customized training for this course, please contact us to arrange.

In this instructor-led, live training in Spain, participants will learn how to start using ROS for their robotics projects through the use of robotics visualization and simulation tools.

By the end of this training, participants will be able to:

• Understand the basics of ROS.
• Learn how to create a basic robotics project using ROS.
• Learn how to use different tools for robotics including simulation and visualization tools.

This instructor-led, live training in Spain (online or onsite) is aimed at beginner-level to intermediate-level and potentially advanced-level robotics developers who wish to learn how to use ROS to program mobile robots using Python.

By the end of this training, participants will be able to:

• Set up a development environment that includes ROS, Python, and a mobile robot platform.
• Create and run ROS nodes, topics, services, and actions using Python.
• Use ROS tools and utilities to monitor and debug ROS applications.
• Use ROS packages and libraries to perform common tasks for mobile robots.
• Integrate ROS with other frameworks and tools.
• Troubleshooting and debugging ROS applications.

A Smart Robot is an Artificial Intelligence (AI) system that can learn from its environment and its experience and build on its capabilities based on that knowledge. Smart Robots can collaborate with humans, working along-side them and learning from their behavior. Furthermore, they have the capacity for not only manual labor, but cognitive tasks as well. In addition to physical robots, Smart Robots can also be purely software based, residing in a computer as a software application with no moving parts or physical interaction with the world.

In this instructor-led, live training, participants will learn the different technologies, frameworks and techniques for programming different types of mechanical Smart Robots, then apply this knowledge to complete their own Smart Robot projects.

The course is divided into 4 sections, each consisting of three days of lectures, discussions, and hands-on robot development in a live lab environment. Each section will conclude with a practical hands-on project to allow participants to practice and demonstrate their acquired knowledge.

The target hardware for this course will be simulated in 3D through simulation software. The ROS (Robot Operating System) open-source framework, C++ and Python will be used for programming the robots.

By the end of this training, participants will be able to:

• Understand the key concepts used in robotic technologies
• Understand and manage the interaction between software and hardware in a robotic system
• Understand and implement the software components that underpin Smart Robots
• Build and operate a simulated mechanical Smart Robot that can see, sense, process, grasp, navigate, and interact with humans through voice
• Extend a Smart Robot's ability to perform complex tasks through Deep Learning
• Test and troubleshoot a Smart Robot in realistic scenarios

Audience

• Developers
• Engineers

Format of the course

• Part lecture, part discussion, exercises and heavy hands-on practice

Note

• To customize any part of this course (programming language, robot model, etc.) please contact us to arrange.